new PAS loudness control
new PAS loudness control
We are currently working on a new kit, the PAS Loudness control.
This kit will come with a small pcb, the parts and a slide switch. This slide switch, which will solder directly to the pcb, will fit into the existing front panel slide switch positions.
For our PAS New Gen kits, the location of the loudness switch will be the first position left of the power switch.
Once it is ready for sale, will let you know.
This kit will come with a small pcb, the parts and a slide switch. This slide switch, which will solder directly to the pcb, will fit into the existing front panel slide switch positions.
For our PAS New Gen kits, the location of the loudness switch will be the first position left of the power switch.
Once it is ready for sale, will let you know.
Custom Handcrafted Tube Audio Gear
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
Re: new PAS loudness control
This is welcomed news. It will certainly look nicer than my "cut & jump" loudness circuit that is mounted to the volume control. Will there be a taped volume control included or have you worked around that issue.
Re: new PAS loudness control
yes, been thinking about it for a while, so finally got on to it!
No, you would need to supply your own 100K audio taper volume control WITH the extra loudness tap. There are quite a few of these available on the market.
Do remember, the loudness circuit is designed to be used with a 250K MN taper balance and 100K audio taper controls. This will be highlighted in the manual you'll get with the kit as well as on the web page once it is published.
Here is a mock up of the pcb and slide switch, the pcb is actually a printout on paper
No, you would need to supply your own 100K audio taper volume control WITH the extra loudness tap. There are quite a few of these available on the market.
Do remember, the loudness circuit is designed to be used with a 250K MN taper balance and 100K audio taper controls. This will be highlighted in the manual you'll get with the kit as well as on the web page once it is published.
Here is a mock up of the pcb and slide switch, the pcb is actually a printout on paper
Custom Handcrafted Tube Audio Gear
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
Re: new PAS loudness control
Thanks for the info. I do have the specified Balance and Volume controls, just was curious.
Re: new PAS loudness control
here is what the front panel would like with one of our New Gen PAS kits
Custom Handcrafted Tube Audio Gear
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
Re: new PAS loudness control
depending on demand, I may end up keeping some 100K volume controls with the loudness tap, time will telljwb474 wrote: Mon Oct 16, 2023 10:35 am Thanks for the info. I do have the specified Balance and Volume controls, just was curious.
Custom Handcrafted Tube Audio Gear
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
Re: new PAS loudness control
Ok folks, the PAS Loudness Control kit has been released, kit#38, details here, https://www.erhard-audio.com/Accessories-Kits.html, scroll down to the kit #38.
I have also added kit#39, which is a 100K volume control with the required loudness tap which is sold separately, same page as above, scroll down to kits 19,20 & 39.
The kit will come with a comprehensive instruction manual as well as all required parts of course.
I know there are 'ALPS' 100K volume controls with loudness taps available off eBay and the like, but they are not genuine ALPS. I have tried them and they seem to work just fine. I will not offer those as they are non genuine ALPS.
I have also added kit#39, which is a 100K volume control with the required loudness tap which is sold separately, same page as above, scroll down to kits 19,20 & 39.
The kit will come with a comprehensive instruction manual as well as all required parts of course.
I know there are 'ALPS' 100K volume controls with loudness taps available off eBay and the like, but they are not genuine ALPS. I have tried them and they seem to work just fine. I will not offer those as they are non genuine ALPS.
Custom Handcrafted Tube Audio Gear
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
Re: new PAS loudness control
This is good news. Got my order in. I also have some Alps Knockoffs and they do seem to be OK. I also have some smaller non-stepping Alps Japan controls that are OK and I wonder if they are Knockoffs too.
Re: new PAS loudness control
thanks for the order, will get that out to you this week.
Yes, even though those 'ALPS' are not genuine, they do work fine....for now....be interesting to see how they fare down the track.
Yes, even though those 'ALPS' are not genuine, they do work fine....for now....be interesting to see how they fare down the track.
Custom Handcrafted Tube Audio Gear
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
www.erhard-audio.com
Dynaco PAS upgrade kits, PAS upgrade kit forum
North American Lundahl Transformers Distributor
Audio Amp Auto Bias Modules Distributor
Re: new PAS loudness control
Hello everyone.
How does this circuit perform in the aikido preamp?
I am about to put together the aikido version from Holger and was wondering if I need one of these loudness controls or if it really does not add much more to the already great products from this forum.
Please let me know.
If it really makes for a great add-on. Can I have it wired permanently? I remember me using it all the time in my old stereos, never turned it off.
Thanks
Frank
How does this circuit perform in the aikido preamp?
I am about to put together the aikido version from Holger and was wondering if I need one of these loudness controls or if it really does not add much more to the already great products from this forum.
Please let me know.
If it really makes for a great add-on. Can I have it wired permanently? I remember me using it all the time in my old stereos, never turned it off.
Thanks
Frank
Last edited by fp2000 on Fri Jan 12, 2024 10:18 pm, edited 1 time in total.