Accessories  kits
Please note:
 
For multiple items ordered, shipping fees will add up. However we will refund excess shipping to you as soon as we have received your order.
 
ALL our kits require assembly! 
 
All the resistors and capacitors are mixed together, they are not packed in their individual values and/or types.
 
Shipping costs are for the lower 48 only. For all other areas, please contact us for shipping costs
 
 
 
Kit #14: RCA 7 Way Input/Output Kit
 
This kit will give you a brand new RCA input/output printed circuit board mounted at the rear of the PAS chassis where the old RCA sockets used to be. Please note that this RCA socket kit has two fewer sockets than the original Dynaco units had.
This kit has been primarily designed to be used with our modern PAS upgrade kits and may not be 100% suitable for use in an original Dynaco PAS.
The RCA sockets are either gold or silver plated and will need to be attached to the I-O PCB. The PCB is manufactured to FR4-TG standards. Please note also that the photos are a general representation, and component colors and style can and will vary.
 
Kit #14
Kit & Instructions: $55.00
shipping to the lower 48 only: $12.00
Kit# 17 ALPS Volume Potentiometer
Kit & Instructions: $39.50
shipping to the lower 48 only: $12.00
Kit #17
Kits 19, 20 & 39  Balance, Volume & Volume with loudness tap
Kit #19 Volume
usually ALPHA
Kit #20 Balance
usually Bourns
NOTE: 100K Volume control is for use with our Z-series presamps and may not be suitable for use with the original Dynaco preamp circuit!
NOTE: 250K Balance control is for use with our Z-series preamps and may not be suitable for use with the original Dynaco preamp circuit!
Kit #19,20,39
General Accessories
Kit# 21 6 position rotary selector switch with pcb
NOT suitable as an original PAS selector switch replacement
 $17.00
Kit# 22 4x slide switches
$19.00
Kit# 23 original tone control capacitor & potentiometer set
NOT a 100% replacement for the PAS-3X
 $35.00
Kit# 24 silver knob set
Kit# 37 black knob set
set screw style, NOT suitable for original potentiometers!
 $43.00
$43.00
Kit# 21 Rotary selector with pcb
Kit# 23 Replacement tone control kit for the original Dynaco circuit
Kit# 22 Slide Switches
Kit #21,22,23,24,37
Kit#25: LED Pilot Light
Amber, Red, Green or Blue
Amber is standard unless another color is requested.
Kit : $14.00 including shipping to lower 48 only!
Kit #25
Kit#36: Blend Function & Center Channel Volume Controls
 
This kit is designed to be used in conjunction with our Center Channel/Mono preamp, kit#35, as it incorporates the volume control for the Center Channel preamp.
However, it can be used as a stand alone blend control by just leaving the Center Channel volume control potentiometer out.
Kit : $47.00 including shipping to lower 48 only!
Kit #36
Kit#38: Loudness function
 
This kit is designed to be used with our Z-Series preamp kits, the TCLA and Aikido.
The Balance control MUST be 250K MN taper, and the Volume control MUST be 100K Audio taper WITH a Loudness tap at about 40% of the potentiometer rotation, the volume control is sold separately, see kit #39 above
Kit : $25.00 including shipping to lower 48 only!
Kit #38
above image for 'show' only. Kit#38 is for the loundess control ONLY!
Kit #39 Volume with loudness tap
NOTE: 100K Volume control with Loudness tap is for use with our Z-series preamps and may not be suitable for use with the original Dynaco preamp circuit!